Can You Put Gutters on a Tile Roof?
Quick answer: Yes. The gutter hangs from the fascia board under the tile edge, and what the tile changes is where the water lands: it leaves the tile out past the fascia, so the gutter has to be wide enough and set right to catch it. Call or text (725) 502-3114 for a free estimate.
What does a tile roof change?
Tile roofs are common on Las Vegas homes, and most of that tile is concrete. Four things about tile matter to a gutter.
The water leaves farther out. On a tile roof the water comes off the edge of the tile, out in front of the fascia. The tile industry's installation manual, quoted in our post on 5-inch vs 6-inch gutters, tells roofers: "Use of rain gutter and eave closures should be considered in determining overhang." Barrel tile also gathers the water. Its shape makes channels that concentrate flow at the roof edge. In a hard monsoon burst, fast water can clear a gutter that is too narrow.
The gutter can sit too low. A gutter hung too low under a tile edge lets water run behind it, down the fascia and the stucco.
The valleys throw a jet. A valley is where two roof planes meet. The tile manual shows the valley metal extending past the roof edge, so the gutter at an inside corner takes a jet of water from both planes, not a sheet.
Nobody should walk on it. The tile manual says: "Walking on roofing tile should be avoided and only done with extreme caution." Gutter work, cleaning and checks on a tile roof are done from ladders, which is one more reason to get the gutter right the first time.
What can I check from the ground?
Watch one storm from a window, a covered patio or the garage, then walk the house afterward. Stay off the tile.
| What you see | Likely cause | What kind of job |
|---|---|---|
| Water landing on the ground in front of a gutter that is not full | Water from the tile is clearing the gutter | Gutter size or position |
| Streaks on the stucco, water running down behind the gutter | Gutter hung too low under the tile edge | Remount, or a new run |
| Water jumping the gutter at an inside corner | A roof valley | More capacity at that corner |
| No gutters, and soil washed out below the roof edges | Water off the tile is landing on the ground | New gutters |
A phone video of the water coming off the roof tells us more than a description. Text it to (725) 502-3114.
How does City Seamless put gutters on a tile roof?
We measure the roof area, count the valleys and drainage points, and recommend the size that fits that roofline. On tile roofs we recommend 6-inch gutters. A 6-inch gutter is an inch wider across the top, so it is a bigger target under the tile edge, and it holds about 40 percent more water per foot than a 5-inch. Of 123 new-gutter jobs we installed or booked from January through October 2026, 116 were 6-inch.
Each run is formed at the house from .032-gauge aluminum in one piece and hung on a hidden hanger system with lag screws fastened to the fascia board, set to catch the water coming off the tile. Where the fascia cannot carry the load, which is common on homes built in the 1960s through 1980s, metal roof straps are fastened through the roofing material and secured to the hanger system.
A 6-inch gutter pairs with 3x4-inch downspouts. Where a valley dumps on an inside corner, the answer is a larger gutter at that corner, an outlet close to the valley or a splash guard on the front lip.
On Mediterranean homes with barrel tile, many owners choose half-round gutters, which echo the curve of the tile. Half-round holds less water than K-style of the same size, so we recommend a larger size or more downspouts when the roof calls for it. We match gutter colors to the tile, the fascia paint and the stucco from more than 50 baked enamel colors.
If the roof edge itself needs work, such as missing drip edge, that is roofing. We can coordinate with our roofing division, City Seamless Roofing, so the roof edge and the gutters work together.
Is it a repair or a new run?
If your tile roof already has gutters, the question is whether they are the right size and in the right place. A sound gutter that sits too low can often be remounted. A 5-inch gutter that tile water shoots past, or that spills along its length in every hard storm, usually needs a wider gutter, and that is a new run.
If the house has no gutters, the job is new gutters. Most of our residential installs are finished in one day, and every installation is backed by a 30-year material warranty and a 5-year workmanship guarantee.
Some owners add metal mesh leaf screens on tile roofs. A screen will not end maintenance, because fine desert dust still settles through any guard, but it means fewer trips up a ladder to a gutter nobody should reach from the roof.
Frequently asked questions
Can you put gutters on a tile roof?
Yes. The gutter hangs from the fascia board under the tile edge. Where the fascia cannot carry the load, metal roof straps are fastened through the roofing material and secured to the hanger system.
Why does rain shoot past my gutters on a tile roof?
Water leaves the tile out in front of the fascia, and barrel tile concentrates it into channels. If the gutter is too narrow for that throw, fast water clears it. A wider gutter set to catch the throw fixes it.
Do I need 6-inch gutters with a tile roof?
We recommend 6-inch gutters for tile roofs, larger roof areas, steeper pitches and multi-level rooflines. A 6-inch gutter is an inch wider across the top and holds about 40 percent more water per foot than a 5-inch.
Is it safe to walk on a tile roof to hang or clean gutters?
The tile industry's installation manual says walking on roofing tile should be avoided and only done with extreme caution. Plan for gutter work on a tile roof to be done from ladders.
What gutter style suits a barrel tile roof?
Half-round gutters echo the curve of barrel tile on Mediterranean and Spanish Colonial homes. K-style works on most homes, tile roofs included. We recommend the best match at the estimate.
Related City Seamless resources
- K-Style Rain Gutters
- Half-Round Rain Gutters
- Why Gutters Overflow in Heavy Rain: Six Las Vegas Causes
- Why Water Runs Behind Your Gutters
- Request an Estimate
Want a number for your house? Request a free on-site estimate or Call or Text 725-502-3114.
About City Seamless Rain Gutter
Company: City Seamless Rain Gutter, family-owned in Las Vegas, with trade roots dating to 1976
Nevada Contractor Licenses: #0081882 and #0082656
Awards: Best of Las Vegas, Las Vegas Review-Journal, 2024 and 2025
Installations: 30,000+ homes installed
Standard Material: .032-gauge aluminum
Warranty: 30-year material warranty and a 5-year workmanship guarantee
Contact: Call or Text 725-502-3114 | cityseamless.com